Nitobond Ep Std Tds

Deep pockets can sometimes be filled in a single application dependent on the configuration of the pocket and the volume of exposed reinforcing steel. FC322070-1L Nitobond HAR 5 litre.

Construction Products Building Products Fosroc

Dekguard E2000 is a crack accommodating elastomeric protective coating for reinforced concrete structures.

Nitobond ep std tds. Get in touch Request a quote. Enables to place the concrete upto 6 hrs after applying Nitobond EP without risk of delamination. Nitobond EP is equally suited to internal and external applications.

The minimum application temperature for Nitobond EP is 10 0C. Possibility of hazardous reactions Reacts with substances which contain active hydrogen. Get in touch Request a quote.

4 - 6 mlitre Storage Shelf life Store in dry conditions at 5C-25C. STABILITY AND REACTIVITY 101. 1 litre tin PC.

322070 5 litre tin PC. Nitobond EP may also be used as part of a repair system where a substraterepair barrier is required or where the substrate is likely to remain permanently damp or wet. The coverage figures for Nitobond EP is theoretical due to wastage factors and the variety and nature of possible substrates practical coverage figures will be reduced.

4 - 6 mlitre Storage Nitobond HAR should be stored in dry conditions at 5C to 25C in original unopened packaging. Supply Nitobond HAR 1 litre. Shelf life is 12 months if stored in dry conditions.

322065 Coverage As primer Nitobond HAR. Nitoprime Zincrich Plus is a zinc-rich epoxy protective coating for steel reinforcement used a s a primer with the Renderoc repair system. It comprises a single component penetrating primer and a single component elastomeric pigmented coating both ready for immediate site use.

The minimum application temperature for Nitobond EP is 5C. It is supplied as a two part material in preweighed quantities for ready onsite mixing and use. To find a TDS or SDS type the name of the product youre looking for in the search box or use the alphabet key to filter the list by letter.

Contact your local Parchem. Being resistant to hydrolysis it is ideal for internal and external applications in conjunction with cement. 4 - 5 m2litre Note.

Nitobond EP is based on solvent-free epoxy resins containing pigments and fine fillers. Thicker sections can be achieved by the use of formwork or can be built up in layers. 15 and 60 litre packs Solvent 10.

Supplied as a ready to use white liquid it is designed to improve the quantities of site-batched cementitious mortars and slurries. Reactivity No specific reactivity hazards associated with this product. Chemical stability Stable under normal temperature conditions.

STORAGE SHELF LIFE Nitobond EP has a shelf life of 12 months if kept in a dry. SAFETY DATA SHEET Nitobond EP Base SDS Nitobond EP Hardener SDS. It is supplied as a two-part material in pre-weighed quantities ready for on-site mixing and use.

Nitobond EP is a 2 component epoxy bonding agent for bonding fresh wet cementitious materials to existing cementitious surfaces. Nitobond EP is based on solvent-free epoxy resins containing pigments and fine fillers. FC322070-5L Nitobond HAR 20 litre.

In exceptional circumstances eg. Coloured components white base and green hardener provide visual evidence that adequate mixing is achieved. Nitobond EP is based on solvent free epoxy resins containing pigments and fi ne fi llers.

When you find the product youre looking for click on the dropdown arrow to expand the selected product. Where a substraterepair barrier is required or where the substrate is wet or likely to remain permanently damp Nitobond EP bonding aid should be used. It is supplied as a two-part material in pre-weighed quantities ready for onsite mixing and use.

Fosroc NITOBOND EP satishenterprises fosroc waterproofing. 322080 20 litre drums PC. Nitobond EP may also be used as part of a repair system where a substraterepair barrier is required or where the substrate is likely to remain permanently damp or wet.

Nitobond SBR is a polymer bonding aid and mortar additive. Do not use Nitobond HAR when the temperature is below 5C and falling. Consult the local Fosroc office for further information.

Nitobond EP is designed with an overlay time of 12 hours at 35C and 5 hours at 45C making it more suitable for use where additional steel reinforcement and formwork has to be fitted or where temperatures are high. NITOBOND EP BASE SECTION 10. Nitobond EP is suited to internal and external applications.

If the Nitobond HAR primer dries before the application of the Renderoc mortar the area must be re-primed before proceeding. Nitobond EP is designed with an overlay time of 10 hrs at 200 C 6 hours at 30 0C making it more suitable for use where additional steel reinforcement and formwork has to be fitted or where temperature is high. FC322070-20L Coverage Nitobond HAR.

Hazardous Polymerisation Will not polymerise. Coloured components white base and green hardener provide visual evidence that adequate mixing is. Nitobond EP Nitobond EP is based on solvent-free epoxy resins containing pigments and fine fillers.

Consult the local Fosroc office for further information. Advantages High strength adhesion - exceeds that of the tensile strength of the host concrete. 4 and 20 litre cans COVERAGE Nitobond EP.

04 Tds Concresive 2200 Epoxy Concrete

04 Tds Concresive 2200 Epoxy Concrete